IVOPROP
                                          ...the propeller for everybody...








Range of carbon/composite propellers, 2, 3 and more blades, ground and in flight electrically adjustable VP and CS in black gell coat with the user replaceable nickel leading edge protection. Suitable for engine from 30 to 300HP. Adjustment is via central screw, which turns CR-MO cams on torque rods cast inside propeller blades, therefore all blades are twisted at once. No need to check the individual blade angle setting. Very popular with two and four stroke Rotax engines. It is the simplicity, low cost, reliability and proven concept on some 40,000 installed props worldwide.

IVOPROP USA propellers are available in Ultralight, Medium and Magnum  sizes
from €500 to €1500 VP adjustable, CS controller is extra. Magnum is available in standard pitch and high pitch for the fast planes - over 200mph at high altitude. For example on N-BB914 Pulsar III with Rotax 914, equipped with Magnum two blade high pitch VP prop, flying at 17,000ft altitude with 220mph ground speed - GPS verified - without redlining the engine RPM.

You can easily convert three blade prop to two blade and vice versa, in case of an accident to one blade you can order just one replacement blade, quoting number on the blade, saving on returning the remaining blade.

This prop can be user customized, in case of the prop being too large in diameter, you can cut the tips with hacksaw, and when you cut same length from each blade, it stays in balance.

Detail of the ground adjustable prop. Please note the fixed root mounting of the prop, cams and central adjustment screw.